Lunar Ips Mac Download

Version 3.3: Download (IPS Format) Forum Thread: View Short Description: A complete new Campaign that plays between AW2 and AW3 with reworked COs and new COP mechanics, complete with a fully new War Room and a PvP map collection in Vs. Lunar Ips Mac Os X Download Download Antivirus For Windows 10 Carport Diagnose Lizenz Free Ip Man 3 Subtitle English Manoj Tiwari Holi Songs Mp3 Free Descargar Prtg.

Browse and download a wide variety of award-winning video, audio, business, utility, or graphics software programs for both PC and Mac.

Check compatibility

Ips Patching Tool

And then download the MacOS high sierra. This file will be in zip format. And so you need to extract it by using WinRAR or any other tool. Now, Launch the Virtual machine and then “Create a new machine”. And then do the following settings: Name: macOS 10.13 High Sierra Type: Mac OS X. Can compile and run on any platform you want. You can get Windows or GTK+ GUIs, or a CLI-only app depending only on libc. (No plans for an OS X port; I don't have any Macs nearby, though I'll include it if someone else makes one.) Can handle files containing characters outside the 8-bit character set (for example フローティング.ips). As I stated previously in auto-patching, the Mac version of Snes9X has an auto-patching feature as well. The only difference is that you need to move the patch over to the “IPS” folder. And then to do manual patching you need to use Multipatch. It's for Mac OS X, and you can download it below.

You can upgrade to OS Yosemite on any of the following Mac models. Your Mac also needs at least 2GB of memory and 8GB of available storage space.

MacBook introduced in 2009 or later, plus MacBook (13-inch, Aluminum, Late 2008)
MacBook Air introduced in late 2008 or later
MacBook Pro introduced in mid 2007 or later
Mac mini introduced in early 2009 or later
iMac introduced in mid 2007 or later
Mac Pro introduced in early 2008 or later
Xserve models introduced in early 2009

To find your Mac model, memory, storage space, and macOS version, choose About This Mac from the Apple menu . If your Mac isn't compatible with OS X Yosemite, the installer will let you know.

Make a backup

Before installing any upgrade, it’s a good idea to back up your Mac. Time Machine makes it simple, and other backup methods are also available. Learn how to back up your Mac.

Get connected

It takes time to download and install OS X, so make sure that you have a reliable Internet connection. If you're using a Mac notebook computer, plug it into AC power.

Download OS X Yosemite

For the strongest security and latest features, find out whether you can upgrade to macOS Catalina, the latest version of macOS.

If you still need OS X Yosemite, use this link: Download OS X Yosemite. A file named InstallMacOSX.dmg will download to your Mac.

Install the macOS installer

Double-click the downloaded file to open a window showing its contents. Then double-click the file within, named InstallMacOSX.pkg.

Follow the onscreen instructions, which will guide you through the steps necessary to install.

Begin installation

After installation of the installer is complete, open the Applications folder on your Mac, then double-click the file named Install OS X Yosemite.

Click Continue and follow the onscreen instructions. You might find it easiest to begin installation in the evening so that it can complete overnight, if needed.

Allow installation to complete

Please allow installation to complete without putting your Mac to sleep or closing its lid. Your Mac might restart, show a progress bar, or show a blank screen several times as it installs both OS X and related updates to your Mac firmware.

Learn more

Lunar Ips Windows 10

OS X Yosemite won't install on top of a later version of macOS, but you can erase your disk first or install on another disk.
You can use macOS Recovery to reinstall macOS.

1.0.5 NOW AVAILABLE!

What is Project Lunar?

Project Lunar is a fully fledged modification tool for the SEGA Mega Drive / GENESIS Mini. It allows users to add games, mods and ports whilst also including a large array of extra features and quality of life improvements. It consists of an on console payload and bespoke desktop application for the PC and is extremely easy to use.

Project Lunar feature list

Add your own selection of SEGA Mega Drive/Genesis ROMS to your console with use on the stock UI
Manage your games, mods and configs via purpose built desktop PC application
Full NAND backups before any customisation
RetroArch bundled with Genesis GX Plus & PicoDrive. (MS,GG,MD,32X, MEGA CD support) (Also capable of playing other consoles by adding additional RetroArch cores)
Performance tweaks and boosts (fix lag issues) (1.0ghz > 1.344ghz, ZRAM compression, DRAM SWAP)
NAND (console only) and USB support
OTG support
exFat, NTFS, FAT32 filesystem support
Extended gamepad compatibility
USB2 and USB3 device support
Customisable boot menu with built-in additional option menu & network manager.
Ability to autoboot to selected boot items. (i.e. boot directly to stock UI)
Additional third-party controller support
Automatic Error recovery system (automatically reload to bootmenu if Stock E error occurs)
Launch boot menu or RetroArch from the Stock UI
EmulationStation support (optional mod package, USB only)
‘Fix’ stock scanlines by toggling smoothing off within stock emulator
Bundled Wi-Fi support (Realtek 8188eu + 8187)
RA MD mini cores downloadable via RA using network adapter
RA scraper and EmulationStation scrapers work using network adapter
SSH/SFTP via RDNIS support
Boot menu, splashscreen and music are all customisable
Additional mod package support

Project Lunar Desktop App features

Easy to use interface to allow installation/removal of PL on console, and console management.
Bulk addition of ROMS
Zipped ROM support (.zip)
New MegaDrive/Genesis games integration is totally seamless in stock UI, with a scraping function providing description, cover art, spine, release year, developer, players, icons, etc. for (almost) every game.
Automatic IPS patching within desktop app
ScreenScraper, TheGameDB scraper support. (Scrape all the details, cover art, and metadata for your games online when adding them)
Automatic spine art generator. If spine art doesn’t exist, PL will generate it for you
Mod management. List, add and remove consoles mod via the mod management tool
Customise stock UI/Emulator features
Interactive assistant to assist users with the install of Project Lunar
Easy sync to either NAND or USB
Recovery mode (for console repair situations)
Automatic update checks. Every time game manager is opened, it will check for console updates online.

Project Lunar 1.0 caveats

Bluetooth support is 80% done, however we want to improve support with broadcom bluetooth devices to extend compatibility. Due to this we have delayed releasing it until 1.1
Xinput and SONY HID drivers are bugged. This means xbox based input devices are not properly working and PS4 controllers (when connected with USB) produce lag in the default emulator. This is something that is being worked on and an update will be pushed out when it’s available.
Individual game selection for sync within desktop is not supported within 1.0. It will be added ASAP

Features to come in 1.1 (or) future rolling update

Folder support. Technically we can implement folders as of 1.0, however we want to do it right and integrate it as seamless as possible.
Launch different console games from stock UI
Custom command “executors” per game. Again, executors are available within 1.0 meaning that you can run any emulator, app or command from the stock UI. This can be done via scripts on the command line however desktop integration will be available in 1.1
Bluetooth support
Desktop app sync via Wi-Fi/Ethernet. This is also available as of 1.0 but we want to improve it. It is also capable of handling multiple consoles on the same network.

Requirements to use Project Lunar

A micro USB cable capable of data transfer (Not cable that shipped with the system)
Windows 7/10
MacOS/Linux *

How to use Project Lunar / Documentation

Below is a list of detailed documentation on each subject. (Click to open in a new tab)

Video How-To Tutorials

Below is a collection of “how-to” videos that should help you install/use Project Lunar

(English) Restalgia

(English) ETAPRIME

(English) JonnyTro

(Spanish) TuberViejuner

(Spanish) LaNaveRetro

(French) RetroJeux

(Japanese) もしも物産

Latest Version Feature List

1.0.5 Project Lunar feature list

Overhauled Stock Savestates (fixed some flaws with the stock M2 code in terms of save states. This is important as it allows for proper folder integration moving forward. We have also laid the foundation work so we can manipulate the SRAMs in the future)
Added Desktop UI executor support. This allows you to run any console emulator from the stock UI. When adding a game, you can select what RA core you wish to use to run it. We also extended the scraper support to allow for all consoles. This means you can now add problematic Mega Drive games to run via RA like Hyperstone Heist or add 32x and Mega CD iso games to the stock UI.
If scraped box art is horizontal (i.e. SNES EU/US box art) rotate it automatically so it fits better on the stock UI
Added .7z compressed rom support. (You can add .7z ROMs)
Added compress ROM addition support. When adding a ROM not intended for the stock emulator, you can chose to have it uploaded compressed.
Added Stock Emulator “Pixel Perfect Mode” option. This will dynamically resize the game screen depending on what the emulator wants it to be instead of force stretching it. (Golden Axe is a good example)
Added “Force theme” option. You can now force a specific region background theme for the stock UI whilst retaining your language. I.e. Japanese theme but with English text. (Please note if you force US from a EU console you will get missing boxart as the EU console doesn’t come with all the artwork for some reason)
Added save state repair. If you have had an issue with save states disappearing into random games etc, you can now run the save state repair by clicking: Tools > Advanced > Fix misplaced save-states (This will also clean up your NAND of any left over save states where the ROM doesn’t exist any more.
Cleaned up uninstall where a file would be left over on uninstall.
Overhauled the main menu save handling (008) so you no longer need to reset your menu settings (i.e. language) when installing/uninstalling.
Added .SMD support
Fixed and re-added The Games DB scraper so you now how two options
Added performance improvements for ScreenScraper. (Also add some reliability fixes)
Added workaround fix to allow install if NAND flag incorrectly set.
Numerous bug fixes

Where to Download

Legal Notice – Please note, by downloading and using this software, you are doing so at your own risk. Neither ModMyClassic, nor it’s affiliates will not be held responsible for any damages to your property when using this software.

(Please note, we updated the installer to be a multi 32/64bit installer and to resolve some other issues. Because of this, the installer won’t fully remove the old PL desktop app from your desktop. You can leave it as is but if you want to and it won’t cause issues, or you can uninstall the desktop app via control panel and install the latest version. This won’t be an issue moving forward. If you chose to uninstall then install, we always recommend to install on top of previous install! Otherwise you will have to copy over your lunar_data to the new install directory.)

(Please also note, if your anti virus flags the installer as a virus, this is a false positive! We are working to work out a way to solve this but some anti virus providers are flagging it as a virus because of the bundled allwinner FEL driver.)

(New! In the interim, Defkorns has made his own Project Lunar games export and import tool to backup your PL config and games and import them. You can find it here)

Downloads – Release page

Mega Drive Mini RetroArch cores – Download here

Project Lunar IPS M2Engage patches – Download here

Credits

(In alphabetical order)

CompCom – Developer
Cyanic – Developer
Defkorns – Developer & Chief UAT Tester
Enderling – Graphics & UI Design
Fred_PJ – Graphics & ES Sound Artist
Swingflip – Developer
TulioAdriano – Developer
Wraith – Developer
Z-10 – Boot Menu Sound Artist
ScreenScraper – Website
TheGameDB – Website
Team Shinkansen – FEL lib

Special thanks to HoneyLab, XorLoser and the Project Lunar testers: DefKorns, Darkdev1, Advokaten, Milenko, AyanamiRei0, defenceplox, FaithLes, Fred_PJ, Gorez, harland_mct, Hidalgator, Iain_YX, Kaliezel, MeteK, Restalgia, Ropen, shintoz, spannernick, UNBREAKABLE, Lodmot

Troubleshooting

Q. I am stuck waiting for reboot! What gives!?A. This is usually due to reconfiguration or conflict with your desktop OS. Usually installing the bundled driver and trying a different USB cable fixes it, however if not. You can try the following:

Press Win+R and type ncpa.cpl
Check if you have a network adapter that says “Remote RNDIS”. If you don’t, it’s a driver problem. Press F4 on the main window, open the driver folder and install it.
If you have a “Remote RNDIS” network adapter and you have a VPN, disable it.
If that’s not the case, temporarily disconnect your internet (unplug Ethernet or disconnect from WiFi). If that solves the problem, your home network is mis-configured and you should get that fixed.

Q. I keep getting install errors/cannot back up console

A. Try a different USB cable and/or USB port, we have had reports in the past of weird behavior which turned out to be down to bad USB cables. Also try with nothing connected to the console and only the USB cable.

Q. The install was successful but after install, my PC won’t detect my console!?

A. This is likely because you are trying to connect your console via FEL mode (holding RESET on boot). You only need to boot into FEL for the initial install or for recovery. For normal operation, you just need to connect your console to the pc and turn it on normally without holding RESET.

Q. I pressed SYNC on the desktop app and now when I select PL from the boot menu I get a black screen! (Music will sometimes still play)

A. This is usually because of a bad sync. Before you disconnect your console from the PC after syncing make sure to turn the console off properly. Usually re-syncing the console via the desktop app will resolve the issue. If issue persists remove the last added games and try syncing again.

Q. I don’t know what I have done, every time I try to load stock UI I get a black screen!

A. This is likely due to a bug or some scenario we haven’t programmed for.Please note that your console is safe. We effectively rebuild and patch the stock UI files dynamically on the fly and load them on top of your stock files. When the black screen appears its because of an issue with the newly generated files. (Not your stock files!) If you are stuck with a black screen and you tried troubleshooting as much as possible. Load and produce the black screen, connect to the console via SFTP/SCP and grab the project_lunar.log file from /tmp and send it over for further analysis.

Q. When I try to run <insert name here> Mega Drive rom from the stock UI, I get an “E<X> Please shutdown error”

A. This is due to the fact the ROM is not supported by the stock emulator. Please refer to the compatibility list.

Q. I plugged in my USB and it won’t work!? (Sometimes the console may just freeze when using USB)

A. You need to make sure that your USB is formatted NON MBR. Also you need to make sure you have an active partition on the usb otherwise you will get weird issues. To set an active partition on your USB if you are having issues:

Press WIN+R to open RUN box, type diskpart
Type list disk (diskpart will list all the disks you have installed)
Type select disk X with X being the right number.
Type list partition
Type select partition Xwith X being the right number.
Type active
Type exit

Q. I synced with Project Lunar and everytime the stock UI opens (even after playing a game) I get the language select menu

A. This is because you have a badly formatted main menu save. We have to rewrite a chunk of the Stock UI code to fix some bugs with the stock code which only allows X amount of games (differs between region console) Because of this fix to the stock code, the old main menu save is NOT compatible with the patched stock UI. On Uninstall and install we remove that save which forces the stock UI to recreate the main menu save file in the new format. Sometime though (especially when using USB) this might go wonky. If so, follow the following instructions. (If you use USB storage make sure the USB is plugged in port 1 or 2 in the console directly)

Make sure you have the latest desktop app version
SYNC with Project Lunar
Open up puTTY (download if need) and SSH to console. Details in FAQ
copy and paste each line one by one with the console plugged in and on and run them (make sure USB is connected)

Q. Help I think I have bricked my console!

A. This is technically not possible, so don’t panic! One of our main concerns during development was safety. Because of this, we ensure that a full NAND partition backup is carried out before any modifications take place. On top of this we included a recovery/staging image which will boot your console even if your NAND partitions are completely empty and also a fail safe recovery system, which will directly flash raw backup images to your NAND partitions. (For extreme emergencies only!)

Because we don’t adjust any of the partition table on the NAND or OOB data and make minimal adjustments to the rootfs, the mod is as safe as we could make it whilst giving as much flexibility and functionality as possible. Because we only write to areas of the NAND that are partitioned, the ultimate fail safe will allow you to flash the raw partition images back to the NAND partitions.

This being said, the stock UI is very complicated so if there is a single error due to a bug you might get issues. Please contact us on the #sega-support channel here and one of the team or devs will try and help you resolve your issue.

FAQ

Q. I am stuck waiting for reboot! What gives!?

A. This is usually due to reconfiguration or conflict with your desktop OS. Usually installing the bundled driver and trying a different USB cable fixes it, however if not. You can try the following:

Press Win+R and type ncpa.cpl
Check if you have a network adapter that says “Remote RNDIS”. If you don’t, it’s a driver problem. Press F4 on the main window, open the driver folder and install it.
If you have a “Remote RNDIS” network adapter and you have a VPN, disable it.
If that’s not the case, temporarily disconnect your internet (unplug Ethernet or disconnect from WiFi). If that solves the problem, your home network is mis-configured and you should get that fixed.

Q. My console won’t respond on the PC when I have it plugged in via an OTG adapter

A. This is expected. The OTG redirects the DATA lines from the passthrough, make sure when syncing with the pc, you connect the console directly into the pc without any adapters inline.

Q. My PC won’t recognise my console? (Even if you have used hakchi in the past with another console)

A. Originally the driver for Allwinner FEL was hardcoded to Nintendo NES/SNESC. This has since changed from Hakchi and to minimise issues with users and using multi consoles/solutions, we also use the updated version of the “classic” driver. You will need to install the driver bundled with the Project Lunar Desktop App and then your console should work fine. Default location: C:<USR>AppDataLocalModMyClassicProject Lunar Desktop UIlunar_datadriverclassic_driver.exe (replace <USR> with your desktop username)

Q. My PC won’t detect my console even after installing the driver!?

A. Make sure you are not using the Micro USB cable supplied with the SEGA Mega Drive. It doesn’t contain data lines and is only capable of power! Try a Micro USB from a different device

Q. I just want to boot straight to stock UI/RA/something else, I don’t to boot to the boot menu?

A. This is easily done. When first installed the console will boot automatically to the boot menu. All you need to do from here is to hover over your selected boot choice, (Project Lunar for stock UI) and press start. The next time you boot the console it will auto-boot to your selected element.

Q. I set my console to auto-boot to X and I want to access the boot menu?

A. When the console is starting and before it auto boots your selected boot choice, an auto-boot screen will display for one second. During this auto-boot screen press B (or equivalent) on your controller to interrupt the auto-boot and display the boot menu.

Q. How many games can be on the stock UI screen at one time?

A. At stock speeds, (1.0ghz) approximately 60 extra games will cause the stock UI start to lag however it is subjectively perfectly usable. At 100 extra games the stock UI will lag too much to be usable. Increasing the clock speed to 1.344ghz will alleviate the lag and render times. When we include folder support, this issue should effectively go away.

Q. I don’t want RetroArch on my console, can I remove it so I can add more games?

A. Short answer is no and there is a good reason why. To keep Project Lunar as simple and safe as possible, we don’t interfere with the stock console’s partition table and therefore use a normally unused partition for the on console base modifications including a slimmed down RetroArch client (which is extendable). This partition isn’t available for use by the stock emulator and therefore removing it wouldn’t provide any extra usable space for extra games, save states or additional add ons. The RetroArch client was purposefully made so it’s extremely lightweight with the option of being extended if the end user wishes to do so.

Q. I just installed Project Lunar and without doing anything it says I have 163mb (or less) available of 170mb without USB storage?

A. Project Lunar will install and utilise the same partition as the stock emulator uses for save states. If you have any save states already on the console it will take up space on the partition (approx 850kb per save). With a completely fresh set up, the stock console utilises 7mb of the partition.

Q. I just hit SYNC without any custom games and I just lost 15mb available space on my NAND!

A. As of 1.0, this is an unfortunate requirement. We have to effectively re-upload 120 of the stock artwork resources to rootfs_data along with the extra custom game artwork. This is because the Stock UI (M2engage) is hard coded to only accept one resource stream. However this won’t be the case in future revisions as we plan to remove the need to re-upload the stock 120 artwork images by rewriting more of the stock UI code to allow for multiple resource streams. When we add this feature you should find yourself with ~15mb freed up when you SYNC.

Please note this ~15mb requirement is a one off. So technically it’s (163mb – ~15mb) = available space on NAND. Each game will take up to 2mb on average. The 15mb requirement will disappear in future builds.

Q. I want to use USB storage, how do I do that?

A. You can plug the USB into one of the front USB ports before you power the console or during runtime. The USB will automatically mount, initialise and set up for use with Project Lunar. If you want to use the USB with OTG, once synced, shut down console and plug USB into OTG adapter.

Q. What rom formats are supported?

A. As of 1.0 only Mega Drive games are technically supported with the file formats of (.md, .gen, .bin, .zip)

Q. I am getting slow down/audio desync/input lag, how can I fix that?

A. Make sure you have all the performance tweaks enabled within the options menu. All performance tweaks are enabled by default apart from the 1.00ghz > 1.344ghz clock speed option.

Lunar Ips Mac Download

Q. What is the SSH/SFTP details and login?

Lunar Ips Download Pc

A. IP address: 169.254.215.100, Port: 22, User: root, Pass: (No password!)

Lunar Ips Mac Download Windows 10

Q. What is the deal about the 1.344ghz clock, is it safe? Is it classed as overclocking?

A. Yes and it’s not overclocking!!! It’s relatively safe however we accept ZERO responsibility for any damage caused to your console. The only reason we don’t enable this option by default is because it’s the end user’s responsibility. That being said. The 1.344ghz is fully stable and the chip is technically rated with an absolute maximum of 1.5ghz at 1.5volts. When clocked at 1.344ghz the voltage is set to 1.46volts, well within the chip’s tolerances for both frequency and voltage. However due to differences during manufacturing between chips, your console might run hotter than others. The safe limit for the chip should not exceed 80c and we have implemented a throttle facility to throttle the CPU back to 1.0ghz if the SoC temperature hits 68c. If the throttle engages, it will be logged and will last the duration that the console remains switched on. Theoretically this should never happen and isn’t something we have encountered during the hours of testing however safety is one of our main priorities.

P.s. Contrary to belief, clocking the CPU to anything below the chip’s absolute maximum frequency or voltage is not overclocking! You can read more about it here: https://linux-sunxi.org/Cpufreq#.22Overclocking.22

Q: I added a game and the image doesn’t fill the screen (downscaled).

A: Try to change the Rom Region on Project Lunar to Force USA (NTSC)

Q. What USB Ethernet/Wi-fi adapters are supported?

A. We bundle a limited number of drivers due to size restrictions, however we have always targeted any adapter running the Realtek 8187/8188EU chipset. We have a limited number of extra chipsets supported within an “extended network driver pack” available here: (coming soon) It should be noted that any generic USB2.0 Ethernet adapter should work without issue too.

Lunar Ips Download Free

Q. How do I change my options and configuration?

A. You are able to access and change console options like performance tweaks on the boot menu by pressing B (Or equivalent). You can also access the on console network management tool by pressing C (Or equivalent).

Lunar Ips Mac Download Free

Q. I run MacOS/Linux, How can I use this?

Ips Patcher Mac

A. There is currently a big ongoing project which is 100% compatible with MacOS/Linux/Windows however in the meantime you will be required to run it in a virtual environment using Virtualbox until the PL module is completed in the separate project.